NSN 5305-00-165-1873
High Torque Screw
Between 1.024 inches and 1.054 inches fastener length, flat countersunk head style, between 0.456 inches and 0.508 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number VT1662-4-9 for national stock number 5305001651873.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-165-1873.
-
MPN or Model
VT1662-4-9
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.452 inches and 0.502 inches -
Fastener Length
Between 1.024 inches and 1.054 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.456 inches and 0.508 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.552 inches and 0.572 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Nickel and cadmium -
Surface Treatment Specification
Ams 2416 assn standard all treatment responses -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-308-1578 MPN AIC811-04-12Socket Head Cap Screw
- 5305-00-441-0162 MPN AIC82-7-68Close Tolerance Screw
- 5305-00-492-8753 MPN NAS1101-08-8BMachine Screw
- 5305-00-507-2176 MPN LS15265V4-12Close Tolerance Screw
- 5305-00-680-5923 MPN BACB30LU4-17Close Tolerance Screw
- 5305-00-781-5663 MPN AIC813-3-R16Machine Screw
- 5305-00-820-2383 MPN NAS1101-3H12Machine Screw
- 5305-00-840-5962 MPN 965336-1Externally Relieved Body Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-165-1873 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VT1662-4-9 | Alcoa Global Fasteners, Inc. |
AIC4563-4-9 | Sps Technologies, Llc |
C4563-4-9 | Textron Fastening Systems |
C4563-4-9 | Lockheed Martin Corporation |
A1C4563-4-9 | Sps Technologies, Llc |