NSN 5305-00-167-3934
Bolt Stove
0.375 inches fastener length, flat countersunk head style, between 0.175 inches and 0.199 inches head diameter, internal drive style: cross recess type 1.
Manufacturer part number AN505-3R6 for national stock number 5305001673934.
Datasheet
-
Product description
Machine Screw NSN 5305-00-167-3934.
-
MPN or Model
AN505-3R6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.333 inches and 0.375 inches -
Fastener Length
0.375 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.175 inches and 0.199 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.099 inches -
Thready Qty Per Inch (tpi)
48 -
Min. Tensile Strength (psi)
55000 pounds per square inch -
Countersink Angle
Between 80.0 degrees and 82.0 degrees -
Screw Material
Steel or steel comp 1010 -
Screw Material Specification
Qq-s-630 federal specification 2nd material response or qq-s-631 federal specification 2nd material response or qq-s-634 federal specification 2nd material response -
Screw Surface Treatment
Cadmium -
Screw Surface Treatment Specification
Qq-p-416, type 1, cl 3 federal specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 4820-00-182-4836 MPN 514364-1Fluid Valve Stem
- 5905-00-994-0545 MPN 412299-13Noninductive Wire Wound Fixed Resistor
- 5930-01-486-1904 MPN 6545C163-29Push Switch
- 1680-01-522-2514 MPN 522125-1Electrical-electronic Equipment Control Panel
- 5935-00-148-8381 MPN 513188-32-7SElectrical Plug Connector
- 4920-01-664-7122 MPN 3239A5840-1Mast Cap
- 6110-00-315-9894 MPN 55-4782-3Controller
- 5305-00-111-2246 MPN 509441-814ASocket Head Cap Screw
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-00-167-3934 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN505-3R6 | Aeronautical Standards Group |
FFS92ANDTYPE3STYLE2C | Federal Specifications |
1175-3-6 | Naval Air Warfare Center Aircraft |