NSN 5305-00-173-8104
High Torque Screw
Between 0.862 inches and 0.909 inches fastener length, flat countersunk head style, between 0.390 inches and 0.395 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number HT184-4-9 for national stock number 5305001738104.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-173-8104.
-
MPN or Model
HT184-4-9
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.316 inches -
Fastener Length
Between 0.862 inches and 0.909 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.390 inches and 0.395 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 0.552 inches and 0.572 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
40.0 rockwell c and 43.0 rockwell c -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp 4140 or steel comp e4340 or steel comp 4340 or steel comp 8740 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-680-6375 MPN HT4M-18Close Tolerance Screw
- 5305-00-990-1379 MPN NAS1190-08P6NSocket Head Cap Screw
- 5305-01-141-7193 MPN 3M902C6-10AShoulder Screw
- 5305-01-195-1576 MPN HR217V-08-4Machine Screw
- 5305-01-217-9058 MPN HT4060V4-6ASShoulder Screw
- 5305-01-224-6693 MPN HT295-3-4Close Tolerance Screw
- 5305-01-237-2782 MPN HT4057-4-11AClose Tolerance Screw
- 5305-01-337-9123 MPN HT359RNE6-14Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-173-8104 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT184-4-9 | Hi-shear Corporation |
HT8039-4-9 | Alcoa Global Fasteners, Inc. |