NSN 5305-00-174-8621
High Torque Screw
Between 0.800 inches and 0.847 inches fastener length, flat countersunk head style, between 0.390 inches and 0.395 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number HT184-4-8 for national stock number 5305001748621.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-174-8621.
-
MPN or Model
HT184-4-8
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.290 inches and 0.357 inches -
Fastener Length
Between 0.800 inches and 0.847 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.390 inches and 0.395 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 0.490 inches and 0.510 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
40.0 rockwell c and 43.0 rockwell c -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp 4140 or steel comp e4340 or steel comp 4340 or steel comp 8740 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-182-9410 MPN CVC241A4-20Machine Screw
- 5305-00-356-1624 MPN LS15265V3-16Close Tolerance Screw
- 5305-01-050-9001 MPN C7984-3-9Close Tolerance Screw
- 5305-01-054-4637 MPN BACB30LK3-3Close Tolerance Screw
- 5305-01-064-4692 MPN C7985-3-3Close Tolerance Screw
- 5305-01-191-0383 MPN SC2174C06-3Machine Screw
- 5305-01-196-5091 MPN LD111-0044-2422Close Tolerance Screw
- 5305-01-333-2719 MPN 03A174-4-103A174-4-13Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-174-8621 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT184-4-8 | Hi-shear Corporation |
HT8039-4-8 | Arconic Global Fasteners & Rings, |
HT8039-4-8 | Alcoa Global Fasteners, Inc. |