NSN 5305-00-180-0180
Bolt Stove
0.593 inches fastener length, flat countersunk head style, between 0.447 inches and 0.507 inches head diameter, internal drive style: cross recess type 1.
Manufacturer part number AN509-416R9 for national stock number 5305001800180.
Datasheet
-
Product description
Machine Screw NSN 5305-00-180-0180.
-
MPN or Model
AN509-416R9
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.453 inches -
Fastener Length
0.593 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.447 inches and 0.507 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.250 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
Between 26.0 rockwell c and 32.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Screw Material
Steel -
Screw Surface Treatment
Cadmium -
Thread Series Designator
Unf
More from these suppliers
- 5950-00-053-8246 MPN 10051086Radio Frequency Coil
- 5985-00-073-6508 MPN 10066259Waveguide Assembly
- 5905-00-141-1160 MPN 10214800-126Inductive Wire Wound Fixed Resistor
- 5950-00-190-1163 MPN 10125212Power Transformer
- 5975-00-280-9221 MPN 8485191Electrical Conduit Elbow
- 5940-00-336-8082 MPN 8023621Terminal Board Cover
- 4820-00-401-0789 MPN 10161938Valve Adjusting Lock Ring
- 5935-00-401-6554 MPN 10123549-7Electrical Receptacle Connector Body
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-00-180-0180 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN509-416R9 | Aeronautical Standards Group |
MILS7839 | Military Specifications |
8175900 | U S Army Aviation And Missile |
AN509-416R9REV2 | Aeronautical Standards Group |
AN509-416R9 | Air Force-navy Aeronautical |