NSN 5305-00-180-1435
Bolt Stove
Between 0.453 inches and 0.500 inches fastener length, flat countersunk head style, between 0.283 inches and 0.332 inches head diameter, internal drive style: cross recess type 1.
Manufacturer part number AN509-8R7 for national stock number 5305001801435.
Datasheet
-
Product description
Machine Screw NSN 5305-00-180-1435.
-
MPN or Model
AN509-8R7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.328 inches and 0.406 inches -
Fastener Length
Between 0.453 inches and 0.500 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.283 inches and 0.332 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.164 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
Between 26.0 rockwell c and 32.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Screw Material
Steel -
Screw Surface Treatment
Cadmium -
Thread Series Designator
Unc
More from these suppliers
- 1560-00-004-3065 MPN GS25E1Harness Support
- 5935-00-009-6578 MPN GC800DKB2403SElectrical Plug Connector
- 1560-00-030-5845 MPN 37P67173-7Outlet Engine Wye
- 5935-00-156-6332 MPN GA800RH24-7Electrical Connector Backshell
- 1560-00-163-1961 MPN 128CS10009-21Slat Assy
- 1680-00-238-6737 MPN 1128AVP40008-9Control Cover
- 1560-00-456-9838 MPN 1128EC42050-33Insulation Section
- 5930-00-557-1792 MPN S945-3Electrical Switch Cover
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-00-180-1435 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN509-8R7 | Aeronautical Standards Group |
MILS7839 | National Aerospace Standards |
G92-7 | Northrop Grumman Systems Corporation |
MILS7839 | Military Specifications |