NSN 5305-00-182-7381
High Torque Screw
Between 0.699 inches and 0.729 inches fastener length, flat countersunk head style, between 0.328 inches and 0.385 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number LS9361-1203-7 for national stock number 5305001827381.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-182-7381.
-
MPN or Model
LS9361-1203-7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.251 inches and 0.301 inches -
Fastener Length
Between 0.699 inches and 0.729 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.328 inches and 0.385 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.190 inches -
Grip Length
Between 0.428 inches and 0.438 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-8503 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-6049 military specification 5th material response -
Surface Treatment
Cadmium and chromate or primer -
Surface Treatment Specification
Qq-p-416 type 2 cl 3 federal specification single treatment response or lac c-156-f fscm 36659 mfr ref single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-012-8049 MPN 3W12029-101Aircraft Structural Panel
- 1560-00-012-8065 MPN 3W12032-103Aircraft Structural Panel
- 5975-00-021-4519 MPN 914986-1Interconnecting Box Cover
- 1560-00-027-1376 MPN 766892-13Insulation Blanket
- 1560-00-028-1551 MPN 780524-1Canopy Fittin Plate
- 1560-00-032-6570 MPN 3C20103-147Center Console Cover Assembly
- 4820-00-032-8164 MPN 633803-4Poppet Drain Cock
- 1560-00-070-5943 MPN 383885-17Wing Tip Assembly
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-182-7381 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LS9361-1203-7 | Lockheed Martin Corporation |