NSN 5305-00-184-9451
High Torque Screw
Between 2.595 inches and 2.605 inches fastener length, between 0.2483 inches and 0.2492 inches grip diameter, hexagon internal drive style, thread diameter: 0.250 inches.
Manufacturer part number LM307-31 for national stock number 5305001849451.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-184-9451.
-
MPN or Model
LM307-31
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.243 inches and 0.263 inches -
Fastener Length
Between 2.595 inches and 2.605 inches -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Internal Drive Style
Hexagon -
Thread Diameter
0.250 inches -
Grip Length
Between 2.295 inches and 2.305 inches -
Width Across Flats
Between 0.1572 inches and 0.1592 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel -
Surface Treatment
Cadmium -
Surface Treatment Specification
J-1221-18, type 1c fscm 76005 mfr ref single treatment response -
Thread Series Designator
Unf
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-184-9451 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LM307-31 | Lord Corporation |