NSN 5305-00-185-9637
High Torque Screw
Between 1.761 inches and 1.791 inches fastener length, flat countersunk head style, between 1.087 inches and 1.145 inches head diameter, grip diameter: between 0.5605 inches and 0.5615 inches .
Manufacturer part number NAS2809-16 for national stock number 5305001859637.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-185-9637.
-
MPN or Model
NAS2809-16
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.751 inches and 0.801 inches -
Fastener Length
Between 1.761 inches and 1.791 inches -
Head Style
Flat countersunk -
Head Diameter
Between 1.087 inches and 1.145 inches -
Grip Diameter
Between 0.5605 inches and 0.5615 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.562 inches -
Grip Length
Between 0.990 inches and 1.010 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches grip -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-8503 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-6049 military specification 5th material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unf -
Specification Data
80205-nas2809 professional/industrial association standard
More from these suppliers
- 5305-00-007-1550 MPN NAS1131C96PClose Tolerance Screw
- 5305-00-007-1559 MPN NAS1100E04-16PMachine Screw
- 5305-00-008-7864 MPN NAS1631C2Machine Screw
- 5305-00-008-9118 MPN NAS1190E04T8LSocket Head Cap Screw
- 5305-00-052-6907 MPN MS24629-2Tapping Screw
- 5305-00-059-8445 MPN NAS1086X04Machine Screw
- 5305-00-078-9820 MPN NAS517-3-39Machine Screw
- 5305-00-144-0416 MPN MS35307-399Hexagon Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-185-9637 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS2809-16 | National Aerospace Standards |