NSN 5305-00-192-0580
High Torque Screw
Socket hexagon internal drive on threaded end.
Manufacturer part number C3606-17 for national stock number 5305001920580.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-192-0580.
-
MPN or Model
C3606-17
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.520 inches and 0.560 inches -
Fastener Length
Between 1.030 inches and 1.050 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.492 inches and 0.512 inches -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.490 inches and 0.510 inches -
Width Across Flats
Between 0.127 inches and 0.129 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams6485 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-025-4069 MPN 51B600C06-14BMachine Screw
- 5305-00-186-9221 MPN AIC82-4-30Close Tolerance Screw
- 5305-00-508-5041 MPN LS15267V3-32Machine Screw
- 5305-00-807-0394 MPN NAS1102-08-7Machine Screw
- 5305-00-808-3281 MPN NAS1102-06-6Machine Screw
- 5305-01-059-7419 MPN NAS1101-08-6BMachine Screw
- 5305-01-158-6762 MPN AIC940-3-8Machine Screw
- 5305-01-218-5774 MPN AIC4043-06-12Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-192-0580 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
C3606-17 | Lockheed Martin Corporation |
C3606-17 | Sps Technologies, Llc |
C3606-17 | Hi-shear Corporation |
C3606-17 | Alcoa Global Fasteners, Inc. |
C3606-17 | Lisi Aerospace Canada Corp |
HR112-4-17 | Hi-shear Corporation |
12W5291-17 | Lockheed Martin Corporation |