NSN 5305-00-195-1758
High Torque Screw
Between 0.703 inches and 0.750 inches fastener length, flat countersunk head style, between 0.377 inches and 0.381 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number 3MA123-3-5 for national stock number 5305001951758.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-195-1758.
-
MPN or Model
3MA123-3-5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.381 inches and 0.448 inches -
Fastener Length
Between 0.703 inches and 0.750 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.377 inches and 0.381 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 0.302 inches and 0.322 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
130000 pounds per square inch -
Hardness Rating
24.0 rockwell c and 35.0 rockwell c -
Minimum Yield Strength
85000 pounds per square inch -
Countersink Angle
100.0 degrees -
Material
Iron alloy 660 -
Material Specification
Ams 5736 assn standard single material response -
Surface Treatment
Primer head -
Surface Treatment Specification
Qq-p-416 type 2 cl 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-261-4291 MPN NAS1102-04-22Machine Screw
- 5305-00-465-9332 MPN 56040-92-16Socket Head Cap Screw
- 5305-00-787-7176 MPN 706B745P4Setscrew
- 5305-00-914-9130 MPN NAS1132C6Close Tolerance Screw
- 5305-00-916-4909 MPN NAS1134-2Close Tolerance Screw
- 5305-00-917-6317 MPN SFT22-5A10Machine Screw
- 5305-00-927-0017 MPN 64228V4-10Machine Screw
- 5305-01-054-6238 MPN 121754-6-23Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-195-1758 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3MA123-3-5 | Wesco Aircraft Hardware Corp. |
3MA123-3-5 | Boeing Company, The |
3MA123-3-5 | Sps Technologies, Llc |
3MA123-3-5 | Hi-shear Corporation |
3MA123-3-5 | Alcoa Global Fasteners, Inc. |
3MA123-3-5 | Lisi Aerospace Canada Corp |
3MFRA123-3-5P | Boeing Company, The |