NSN 5305-00-197-1759
Tap Bolt
Between 2.156 inches and 2.250 inches fastener length, hexagon head style, between 0.150 inches and 0.163 inches head height, width between flats: between 0.428 inches and 0.438 inches .
Manufacturer part number G302638-12 for national stock number 5305001971759.
Datasheet
-
Product description
Hexagon Head Cap Screw NSN 5305-00-197-1759.
-
MPN or Model
G302638-12
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.938 inches -
Fastener Length
Between 2.156 inches and 2.250 inches -
Head Style
Hexagon -
Head Height
Between 0.150 inches and 0.163 inches -
Width Between Flats
Between 0.428 inches and 0.438 inches -
Thread Diameter
0.250 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
90000 pounds per square inch -
Criticality Code Justification
Cqbc -
Material
Steel comp 302 or steel comp 304 or steel comp 304l or steel comp 305 or steel comp 316 or steel comp 303 or steel comp 303se or steel comp 316l -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35, type 1, 2, or 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5940-00-272-4421 MPN ES694572-1ISSUEC3Terminal Board
- 5935-00-535-4154 MPN BA98493-1Electrical Receptacle Connector
- 5950-00-736-3739 MPN 9983027Radio Frequency Coil
- 5935-01-123-9911 MPN G376234-3Electrical Receptacle Connector
- 5950-00-518-0482 MPN ES0-690324-1Radio Frequency Coil
- 6145-00-299-7679 MPN G210868-8Electrical Power Cable
- 5905-00-111-1772 MPN 300092Nonprecision Wire Wound Variable Resistor
- 5940-00-187-5068 MPN 121Lug Terminal
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.
Pricing and Availability
Get a quote for 5305-00-197-1759 hexagon head cap screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
G302638-12 | Lucent Technologies Inc |
G302638-12 | A T And T Tecnologies Inc |
G302638-12 | American Telephone And Telegraph Co |
G302638-12 | Albany Fasteners |
G302638-12 | All Manufacturers, Inc. |
G302638-12 | Allmetal Screw Products Corp. |