NSN 5305-00-205-3017
Tap Bolt
Between 2.860 inches and 3.100 inches fastener length, hexagon head style, between 0.531 inches and 0.604 inches head height, width between flats: between 1.269 inches and 1.313 inches .
Manufacturer part number 660C1-12AB for national stock number 5305002053017.
Datasheet
-
Product description
Hexagon Head Cap Screw NSN 5305-00-205-3017.
-
MPN or Model
660C1-12AB
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
2.000 inches -
Fastener Length
Between 2.860 inches and 3.100 inches -
Head Style
Hexagon -
Head Height
Between 0.531 inches and 0.604 inches -
Width Between Flats
Between 1.269 inches and 1.313 inches -
Thread Diameter
0.875 inches -
Thready Qty Per Inch (tpi)
14 -
Min. Tensile Strength (psi)
120000 pounds per square inch -
Hardness Rating
25.0 rockwell c and 34.0 rockwell c -
Surface Finish
63.0 microinches threads -
Material
Steel -
Material Specification
Sae gr 5 assn standard single material response -
Special Test Features
Special quality control testing -
Test Data Document
81349-mil-p-23199 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.). -
Thread Series Designator
Unf -
Reference Number Differentiating Characteristics
As differentiated by material which must conform to ships parts control center special quality control provisions
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.
Pricing and Availability
Get a quote for 5305-00-205-3017 hexagon head cap screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
660C1-12AB | Erie Engineered Products, Inc. |
660C1-12AB | Erie Engineered Products, Inc. |
660C1-12AB | Erie Engineered Products, Inc. |
660C1-12AB | Erie Engineered Products, Inc. |
660C1-12AB | Erie Engineered Products, Inc. |
660C1-12AB | Erie Engineered Products, Inc. |
660C1-12AB | Erie Engineered Products, Inc. |
660C1-12AB | Erie Engineered Products, Inc. |
660C1-12AB | Erie Engineered Products, Inc. |
660C1-12AB | Erie Engineered Products, Inc. |
660C1-12AB | Erie Engineered Products, Inc. |
660C1-12AB | Erie Engineered Products, Inc. |
660C1-12AB | Erie Engineered Products, Inc. |
660C1-12AB | Erie Engineered Products, Inc. |
660C1-12AB | Erie Engineered Products, Inc. |
660C1-12AB | Erie Engineered Products, Inc. |
660C1-12AB | Erie Engineered Products, Inc. |
660C1-12AB | Erie Engineered Products, Inc. |