NSN 5305-00-206-0006
Tap Bolt
3.250 inches fastener length, hexagon head style, between 0.226 inches and 0.243 inches head height, width between flats: between 0.551 inches and 0.563 inches .
Manufacturer part number MS35297-71 for national stock number 5305002060006.
Datasheet
-
Product description
Hexagon Head Cap Screw NSN 5305-00-206-0006.
-
MPN or Model
MS35297-71
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
1.000 inches -
Fastener Length
3.250 inches -
Head Style
Hexagon -
Head Height
Between 0.226 inches and 0.243 inches -
Width Between Flats
Between 0.551 inches and 0.563 inches -
Thread Diameter
0.375 inches -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
120000 pounds per square inch -
Hardness Rating
23.0 rockwell c and 30.0 rockwell c -
Material
Steel -
Surface Treatment
Cadmium and chromate or zinc and chromate -
Thread Series Designator
Unc -
Nondefinitive Specification/std Data
Ii type and 10p style and 5 grade
More from these suppliers
- 4920-00-240-7720 MPN 3629Aircraft Engine Maintenance Stand
- 4820-00-287-3313 MPN N20214PCDAngle Valve
- 5935-00-738-8318 MPN 1916212Electrical Receptacle Connector
- 5935-00-812-2213 MPN 7924291Tip Plug
- 5905-00-889-0442 MPN 7926000-304Composition Fixed Resistor
- 4820-00-278-6555 MPN 2264248Hydraulic System Bleeder Valve
- 5940-01-442-6298 MPN 12176830Lug Terminal
- 5305-00-010-0777 MPN 100777Machine Screw
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.
Pricing and Availability
Get a quote for 5305-00-206-0006 hexagon head cap screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS35297-71 | Military Standards |
FFS85TYPE2STYLE10PGRADE5 | Federal Specifications |
189304 | General Motors Corp |