NSN 5305-00-206-1828
Bolt Stove
Between 1.954 inches and 1.999 inches fastener length, flat countersunk head style, between 0.337 inches and 0.387 inches head diameter, internal drive style: cross recess type 1.
Manufacturer part number NAS517-3-25 for national stock number 5305002061828.
Datasheet
-
Product description
Machine Screw NSN 5305-00-206-1828.
-
MPN or Model
NAS517-3-25
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.315 inches and 0.452 inches -
Fastener Length
Between 1.954 inches and 1.999 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.337 inches and 0.387 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.190 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
Between 36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Screw Material
Steel comp 8630 -
Screw Material Specification
Mil-s-6050 military specification single material response or an-s-9 military standard single material response -
Screw Surface Treatment
Cadmium -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-111-1892 MPN NAS1665-16Electrical Connector Backshell
- 5305-00-005-0631 MPN NAS1509-22Close Tolerance Screw
- 5305-00-016-8175 MPN MS27039-5-27Machine Screw
- 5305-00-055-2566 MPN NAS1219-08-7Machine Screw
- 5305-00-084-3957 MPN NAS1174-2Close Tolerance Screw
- 5305-00-099-7643 MPN MS21125-0426Close Tolerance Screw
- 5305-00-149-8671 MPN NAS1100E02-4Machine Screw
- 5305-00-171-2587 MPN NASM51959-70Externally Relieved Body Screw
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-00-206-1828 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS517-3-25 | National Aerospace Standards |