NSN 5305-00-206-2305
Bolt Stove
Between 0.094 inches and 0.125 inches fastener length, fillister head style, between 0.124 inches and 0.140 inches head diameter, head height: between 0.053 inches and 0.062 inches .
Manufacturer part number N44P5002C for national stock number 5305002062305.
Datasheet
-
Product description
Machine Screw NSN 5305-00-206-2305.
-
MPN or Model
N44P5002C
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.089 inches and 0.125 inches -
Fastener Length
Between 0.094 inches and 0.125 inches -
Head Style
Fillister -
Head Diameter
Between 0.124 inches and 0.140 inches -
Head Height
Between 0.053 inches and 0.062 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.086 inches -
Thready Qty Per Inch (tpi)
56 -
Min. Tensile Strength (psi)
60000 pounds per square inch -
Screw Material
Steel -
Screw Material Specification
Qq-s-633 federal specification single material response -
Screw Surface Treatment
Cadmium -
Screw Surface Treatment Specification
Qq-p-416 type 2 class 3 federal specification single treatment response -
Thread Series Designator
Unc -
Nondefinitive Specification/std Data
4s style and 1 type
More from these suppliers
- 5930-00-070-8064 MPN 4033082P001Thermostatic Switch
- 5905-00-102-2303 MPN RC30BF3035Composition Fixed Resistor
- 5940-00-193-0217 MPN C7703896P23Terminal Board
- 5940-00-204-5460 MPN K-7110133P1Terminal Board
- 5945-00-237-1281 MPN CR28201746A22Electromagnetic Relay
- 5930-00-259-8563 MPN M55T506Lever Switch
- 4920-00-510-4483 MPN 1C2423Aircraft Maintenance Fixture
- 4920-00-594-2459 MPN 1C2704Air Seal Protector
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-00-206-2305 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
N44P5002C | General Electric Co |