NSN 5305-00-206-2380
Bolt Stove
Between 0.469 inches and 0.500 inches fastener length, flat countersunk head style, between 0.327 inches and 0.385 inches head diameter, internal drive style: cross recess type 1.
Manufacturer part number AN509DD10R7 for national stock number 5305002062380.
Datasheet
-
Product description
Machine Screw NSN 5305-00-206-2380.
-
MPN or Model
AN509DD10R7
-
Schedule B
7616.10.6000 (Threaded fasteners of aluminum) -
NMF (National Motor Freight)
013680 - Alum Screws -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.360 inches and 0.391 inches -
Fastener Length
Between 0.469 inches and 0.500 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.327 inches and 0.385 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.190 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
62000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Screw Material
Aluminum alloy 2024 -
Screw Material Specification
Qq-w-298 federal specification single material response or qq-a-354 federal specification single material response -
Screw Surface Treatment
Anodize -
Screw Surface Treatment Specification
Mil-a-8625 military specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-192-1362 MPN AN3108A18-12PElectrical Plug Connector
- 5935-00-201-4557 MPN AN3100E24-28PXElectrical Receptacle Connector
- 5935-00-204-9377 MPN AN3108M14S9SElectrical Plug Connector
- 5935-00-258-9086 MPN AN3102A22-19PWElectrical Plug Connector
- 5935-00-259-0047 MPN AN3106A18-22SElectrical Plug Connector
- 5935-00-283-3735 MPN AN3102A24-7PElectrical Receptacle Connector
- 5945-00-655-1495 MPN AN3304-2Electromagnetic Relay
- 4820-01-411-1813 MPN 32915Valve Disk
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-00-206-2380 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN509DD10R7 | Aeronautical Standards Group |