NSN 5305-00-206-5534
Panel Screw
0.188 inches fastener length, flat chamfer head style, 0.156 inches head diameter, head height: 0.062 inches .
Manufacturer part number 151844 for national stock number 5305002065534.
Datasheet
-
Product description
Externally Relieved Body Screw NSN 5305-00-206-5534.
-
MPN or Model
151844
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.094 inches -
Fastener Length
0.188 inches -
Head Style
Flat chamfer -
Head Diameter
0.156 inches -
Head Height
0.062 inches -
First Diameter From Head
0.058 inches -
Distance From Largest Bearing Surface Of Head To End Of First Diameter
0.094 inches -
Internal Drive Style
Slot -
Thread Diameter
0.112 inches -
Thready Qty Per Inch (tpi)
40 -
Externally Relieved Body Diameter Quantity
1 -
Material
Steel -
Surface Treatment
Cadmium and chromate -
Thread Series Designator
Unc
More from these suppliers
- 5950-00-053-8246 MPN G360578-2Radio Frequency Coil
- 5905-00-117-0353 MPN ESA682056-95ISS UE26Noninductive Wire Wound Fixed Resistor
- 5905-00-247-7958 MPN D162952-1600Inductive Wire Wound Fixed Resistor
- 5975-00-284-6351 MPN GC52Junction Box
- 5905-00-418-3387 MPN 181694Noninductive Wire Wound Fixed Resistor
- 5945-00-552-4907 MPN U185Electromagnetic Relay
- 5950-00-648-2622 MPN GA51321Audio Frequency Transformer
- 5935-00-820-3126 MPN 401775184Electrical Connector Cover
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also bolt, externally relieved body and bolt, internal wrenching.
Pricing and Availability
Get a quote for 5305-00-206-5534 externally relieved body screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
151844 | Zf Industrieantriebe Witten Gmbh |
151844 | Lucent Technologies Inc |
151844 | Telemechanics Inc |
N17T350015-614 | Department Of The Navy |
151844 | Lucent Technologies Inc |