NSN 5305-00-206-6011
Panel Screw
Two wrench flats on head 0.182 width between flats.
Manufacturer part number 8200284 for national stock number 5305002066011.
Datasheet
-
Product description
Externally Relieved Body Screw NSN 5305-00-206-6011.
-
MPN or Model
8200284
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.250 inches -
Fastener Length
0.281 inches -
Head Style
Fillister -
Head Diameter
Between 0.245 inches and 0.250 inches -
Head Height
0.125 inches -
First Diameter From Head
Between 0.118 inches and 0.123 inches -
Distance From Largest Bearing Surface Of Head To End Of First Diameter
0.031 inches -
Internal Drive Style
W/o internal drive -
Thread Diameter
0.164 inches -
Thready Qty Per Inch (tpi)
36 -
Hardness Rating
35.0 rockwell c and 40.0 rockwell c -
Externally Relieved Body Diameter Quantity
1 -
Material
Steel comp 416 -
Material Specification
Qq-s-763 federal specification single material response -
Thread Series Designator
Unf
More from these suppliers
- 5975-00-296-9437 MPN 9322119Electrical Box Connector
- 5940-00-924-6650 MPN 11699368-2Terminal Board
- 5905-00-983-7320 MPN 8623438-12Noninductive Wire Wound Fixed Resistor
- 5935-01-085-0489 MPN 11780711-3-4Electrical Connector Insert
- 5985-01-094-1533 MPN 10558238Waveguide Adapter
- 5935-01-115-4173 MPN 11829973-12Electrical Plug Connector
- 5975-01-142-2799 MPN 9341190Interconnecting Box
- 5935-01-472-6943 MPN 12986249Electrical Connector Jackscrew
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also bolt, externally relieved body and bolt, internal wrenching.
Pricing and Availability
Get a quote for 5305-00-206-6011 externally relieved body screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
8200284 | Us Army Ardec Rdecom |