NSN 5305-00-206-8416
High Torque Screw
Between 2.265 inches and 2.312 inches fastener length, flat countersunk head style, between 1.007 inches and 1.017 inches head diameter, grip diameter: between 0.4986 inches and 0.4991 inches .
Manufacturer part number NAS338A21-5 for national stock number 5305002068416.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-206-8416.
-
MPN or Model
NAS338A21-5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.756 inches and 0.823 inches -
Fastener Length
Between 2.265 inches and 2.312 inches -
Head Style
Flat countersunk -
Head Diameter
Between 1.007 inches and 1.017 inches -
Grip Diameter
Between 0.4986 inches and 0.4991 inches -
Single Shear Strength
18650 pounds per square inch -
Internal Drive Style
Hexagon -
Thread Diameter
0.500 inches -
Grip Length
Between 1.490 inches and 1.510 inches -
Width Across Flats
Between 0.376 inches and 0.379 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches grip -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-8503 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-6049 military specification 5th material response -
Thread Series Designator
Unf -
Specification Data
80205-nas338 professional/industrial association standard
More from these suppliers
- 5940-01-354-9985 MPN NAS1063A20-1008Terminal Board Marker Strip
- 1680-01-478-1737 MPN NAS43DD0-38FCAircr Sleeve Spacer
- 5940-01-010-1571 MPN NAS1745-15Conductor Splice
- 5935-00-153-4395 MPN NAS1642R16-24SNElectrical Receptacle Connector
- 5305-00-052-4031 MPN NAS1352-04LE8PSocket Head Cap Screw
- 5305-00-052-5941 MPN MS35198-83Machine Screw
- 5305-00-057-0500 MPN MS51958-4Machine Screw
- 5305-00-058-4016 MPN MS24694S128Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-206-8416 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS338A21-5 | National Aerospace Standards |