NSN 5305-00-207-1868
Bolt Stove
Between 2.516 inches and 2.561 inches fastener length, flat countersunk head style, between 0.287 inches and 0.334 inches head diameter, internal drive style: cross recess type ii.
Manufacturer part number NAS517-2-34 for national stock number 5305002071868.
Datasheet
-
Product description
Machine Screw NSN 5305-00-207-1868.
-
MPN or Model
NAS517-2-34
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.314 inches and 0.451 inches -
Fastener Length
Between 2.516 inches and 2.561 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.287 inches and 0.334 inches -
Internal Drive Style
Cross recess type ii -
Thread Diameter
0.164 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
Between 36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Screw Material
Steel comp 8630 or steel comp 4037 -
Screw Material Specification
Mil-s-6050 military specification 1st material response or ams 6300 assn standard 2nd material response -
Screw Surface Treatment
Cadmium -
Screw Surface Treatment Specification
Qq-p-416 type 2 class 3 federal specification single treatment response -
Thread Series Designator
Unc -
Specification Data
80205-nas517 professional/industrial association standard
More from these suppliers
- 5935-01-323-4638 MPN MS33686-22-2PElectrical Connector Insert
- 5940-01-394-5134 MPN NAS707S1Stud Terminal
- 5940-00-827-0772 MPN NAS1063A6-1Terminal Board Marker Strip
- 5305-00-004-5177 MPN NAS1100V3-6Machine Screw
- 5305-00-008-5892 MPN NAS1102E08-30Machine Screw
- 5305-00-052-8874 MPN MS24630-1Tapping Screw
- 5305-00-156-2358 MPN MILS7839Machine Screw
- 5305-00-225-8476 MPN MS24693-S144Machine Screw
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-00-207-1868 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS517-2-34 | National Aerospace Standards |