NSN 5305-00-207-2260
Panel Screw
Between 0.235 inches and 0.265 inches fastener length, fillister head style, between 0.178 inches and 0.183 inches head diameter, head height: 0.072 inches .
Manufacturer part number 146414-6 for national stock number 5305002072260.
Datasheet
-
Product description
Externally Relieved Body Screw NSN 5305-00-207-2260.
-
MPN or Model
146414-6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.4 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.190 inches -
Fastener Length
Between 0.235 inches and 0.265 inches -
Head Style
Fillister -
Head Diameter
Between 0.178 inches and 0.183 inches -
Head Height
0.072 inches -
First Diameter From Head
Between 0.071 inches and 0.076 inches -
Distance From Largest Bearing Surface Of Head To End Of First Diameter
0.060 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.112 inches -
Thready Qty Per Inch (tpi)
40 -
Hardness Rating
34.0 rockwell c and 38.0 rockwell c -
Externally Relieved Body Diameter Quantity
1 -
Material
Steel comp 8740 -
Material Specification
Mil-s-6049 military specification single material response -
Thread Series Designator
Unc
More from these suppliers
- 5975-00-045-1715 MPN 614937-10Electrical Equipment Rack
- 5930-00-050-2696 MPN 0135-11Toggle Switch
- 5950-00-067-5508 MPN 1511214Radio Frequency Transformer
- 5950-00-102-8635 MPN 12895Power Autotransformer Transformer
- 5905-00-104-8334 MPN 813186-37Composition Fixed Resistor
- 5935-00-243-0992 MPN 1604241-1Electrical Receptacle Connector Body
- 5930-00-263-0731 MPN 809788Thermostatic Switch
- 5935-00-421-2556 MPN 338381-60Electrical Plug Connector Body
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also bolt, externally relieved body and bolt, internal wrenching.
Pricing and Availability
Get a quote for 5305-00-207-2260 externally relieved body screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
146414-6 | Lockheed Martin Corporation |