NSN 5305-00-208-6282
Tap Bolt
Between 1.175 inches and 1.236 inches fastener length, hexagon head style, 0.160 inches head height, width between flats: between 0.428 inches and 0.440 inches .
Manufacturer part number 175759-4 for national stock number 5305002086282.
Datasheet
-
Product description
Hexagon Head Cap Screw NSN 5305-00-208-6282.
-
MPN or Model
175759-4
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 1.175 inches and 1.236 inches -
Fastener Length
Between 1.175 inches and 1.236 inches -
Head Style
Hexagon -
Head Height
0.160 inches -
Width Between Flats
Between 0.428 inches and 0.440 inches -
Thread Diameter
0.250 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Material
Steel comp 8630 -
Material Specification
Mil-s-6050 military specification single material response -
Thread Series Designator
Unf
More from these suppliers
- 1560-01-205-8425 MPN 345218-3Aircraft Structural Component Support
- 5306-00-680-5869 MPN 403758-1Shoulder Bolt
- 5306-01-193-6997 MPN 811941-1Threaded End Rod
- 1560-00-007-6620 MPN 4P50003-103CAircraft Pylon
- 1560-00-009-5981 MPN 4W23099-104AFlap Track Fitting
- 1560-00-009-5996 MPN 4F77204-195AFairing Beam Assembly
- 1560-00-014-6149 MPN 4J33024-101BAircraft Structural Component Support
- 1560-00-022-0287 MPN 766284-2Escape Hatc Fitting
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.
Pricing and Availability
Get a quote for 5305-00-208-6282 hexagon head cap screwManufacturer Part Numbers and Alternates
| MPN manufacturer part number | Registrant or Supplier |
|---|---|
| 175759-4 | Lockheed Martin Corporation |
| 175759-4 | Aero Engineering & Manufacturing |
Stock Check
