NSN 5305-00-208-7381
Panel Screw
Between 0.590 inches and 0.610 inches fastener length, flat chamfer head style, between 0.292 inches and 0.312 inches head diameter, head height: 0.141 inches .
Manufacturer part number HM137 for national stock number 5305002087381.
Datasheet
-
Product description
Externally Relieved Body Screw NSN 5305-00-208-7381.
-
MPN or Model
HM137
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.210 inches and 0.230 inches -
Fastener Length
Between 0.590 inches and 0.610 inches -
Head Style
Flat chamfer -
Head Diameter
Between 0.292 inches and 0.312 inches -
Head Height
0.141 inches -
First Diameter From Head
0.190 inches -
Second Diameter From Head
Between 0.130 inches and 0.133 inches -
Distance From Largest Bearing Surface Of Head To End Of First Diameter
0.040 inches -
Distance From Largest Bearing Surface Of Head To End Of Second Diameter
0.380 inches -
Internal Drive Style
Slot -
Thread Diameter
0.190 inches -
Thready Qty Per Inch (tpi)
24 -
Externally Relieved Body Diameter Quantity
2 -
Material
Steel comp 303 or steel comp 304 or steel comp 305 -
Surface Treatment
Passivate -
Thread Series Designator
Unc
More from these suppliers
- 5905-00-951-2135 MPN 1829901223Nonprecision Nonwire Wound Variable Resistor
- 5905-01-412-0353 MPN J724-2700GFilm Fixed Resistor
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also bolt, externally relieved body and bolt, internal wrenching.
Pricing and Availability
Get a quote for 5305-00-208-7381 externally relieved body screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HM137 | Navcom Defense Electronics, Inc. |