NSN 5305-00-211-9224
High Torque Screw
Between 1.169 inches and 1.216 inches fastener length, flat countersunk head style, between 0.698 inches and 0.762 inches head diameter, grip diameter: between 0.3733 inches and 0.3742 inches .
Manufacturer part number 106706H6-10 for national stock number 5305002119224.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-211-9224.
-
MPN or Model
106706H6-10
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.534 inches and 0.601 inches -
Fastener Length
Between 1.169 inches and 1.216 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.698 inches and 0.762 inches -
Grip Diameter
Between 0.3733 inches and 0.3742 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole -
Internal Drive Style
High-torque -
Thread Diameter
0.375 inches -
Grip Length
Between 0.615 inches and 0.635 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.876 inches first hole and 0.908 inches first hole -
Material
Steel -
Material Specification
Sps-m-107 fscm 56878 mfr ref single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard 1st treatment response or mil-c-8837 type 2 cl 2 military specification 2nd treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 4820-00-004-7029 MPN A51E9101-1Relief Valve
- 5935-00-063-5281 MPN GA800A1BConnector Adapter
- 5940-00-065-2474 MPN GC806EE1-9Terminal Board
- 5935-00-088-7461 MPN GC800A-E20-37SElectrical Plug Connector
- 5940-00-240-9700 MPN 128AVP10276-3Terminal Board
- 1560-00-276-9298 MPN 123CSM10017-7Fitting Assembly
- 1560-00-333-6833 MPN 87990Aircraft Structural Panel
- 1560-00-373-7765 MPN 89H1078-1Tank Hydra Drip Pan
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-211-9224 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
106706H6-10 | Sps Technologies, Llc |
HT8171H6-10 | Alcoa Global Fasteners, Inc. |
HT8171-6-10 | Alcoa Global Fasteners, Inc. |
GB510BC6-10 | Northrop Grumman Systems Corporation |
106706H6-10 | Sps Technologies Inc |