NSN 5305-00-211-9226
High Torque Screw
Between 0.732 inches and 0.779 inches fastener length, flat countersunk head style, between 0.698 inches and 0.762 inches head diameter, grip diameter: between 0.3733 inches and 0.3742 inches .
Manufacturer part number 106706H6-3 for national stock number 5305002119226.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-211-9226.
-
MPN or Model
106706H6-3
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.534 inches and 0.601 inches -
Fastener Length
Between 0.732 inches and 0.779 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.698 inches and 0.762 inches -
Grip Diameter
Between 0.3733 inches and 0.3742 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole -
Internal Drive Style
High-torque -
Thread Diameter
0.375 inches -
Grip Length
Between 0.178 inches and 0.198 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.4398 inches first hole and 0.471 inches first hole -
Material
Steel -
Material Specification
Sps-m-107 fscm 56878 mfr ref single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard 1st treatment response or mil-c-8837 type 2 cl 2 military specification 2nd treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-084-1906 MPN ST3M495-7-8Shoulder Screw
- 5305-01-090-7147 MPN BACS12BG02AP6Socket Head Cap Screw
- 5305-01-197-8272 MPN HT4053-4D12AClose Tolerance Screw
- 5305-01-251-0781 MPN HT4041-3-4-4Close Tolerance Screw
- 5305-01-303-5634 MPN HT4075D4-10-21Close Tolerance Screw
- 5305-01-304-1326 MPN SC5087-3-6PClose Tolerance Screw
- 5305-01-329-9952 MPN SC5084-3-14Machine Screw
- 5305-01-348-8658 MPN SC5084-3-4Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-211-9226 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
106706H6-3 | Sps Technologies, Llc |
HT8171H6-3 | Alcoa Global Fasteners, Inc. |
GB510BC6-3 | Alcoa Global Fasteners, Inc. |
GB510BC6-3 | Northrop Grumman Systems Corporation |
GB510CE6-3 | Arconic Global Fasteners & Rings, |
GB510CE6-3 | Sps Technologies, Llc |
GB510CE6-3 | Hi-shear Corporation |
GB510CE6-3 | Lisi Aerospace Canada Corp |
GB510CE6-3 | Northrop Grumman Systems Corporation |
106706H6-3 | Sps Technologies Inc |