NSN 5305-00-211-9246
High Torque Screw
Between 1.044 inches and 1.091 inches fastener length, flat countersunk head style, between 0.698 inches and 0.762 inches head diameter, grip diameter: between 0.3733 inches and 0.3742 inches .
Manufacturer part number 106706H6-8 for national stock number 5305002119246.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-211-9246.
-
MPN or Model
106706H6-8
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.534 inches and 0.601 inches -
Fastener Length
Between 1.044 inches and 1.091 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.698 inches and 0.762 inches -
Grip Diameter
Between 0.3733 inches and 0.3742 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole -
Internal Drive Style
High-torque -
Thread Diameter
0.375 inches -
Grip Length
Between 0.490 inches and 0.510 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.751 inches first hole and 0.783 inches first hole -
Material
Steel -
Material Specification
Sps-m-107 fscm 56878 mfr ref single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard 1st treatment response or mil-c-8837 type 2 cl 2 military specification 2nd treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-003-1613 MPN A51B48516-12Cove Door Fitting
- 1560-00-066-2976 MPN 123W10212-1Left Hand Cover
- 5935-00-119-3240 MPN GC805F224PXSMBElectrical Receptacle Connector
- 5935-00-119-8838 MPN GC806G224SX1FA1Electrical Receptacle Connector Body
- 1560-00-152-2773 MPN 87644Aircraft Window Panel
- 1560-00-153-8435 MPN A51B54004-1Aircraft Access Door
- 1560-00-220-3833 MPN A51C11507-3Bracket Assembly
- 5935-00-237-1565 MPN GC810JK1Electrical Plug Connector
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-211-9246 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
106706H6-8 | Sps Technologies, Llc |
HT8171H6-8 | Alcoa Global Fasteners, Inc. |
HT8171-6-8 | Alcoa Global Fasteners, Inc. |
GB510BC6-8 | Northrop Grumman Systems Corporation |
106706H6-8 | Sps Technologies Inc |