NSN 5305-00-213-8884
Panel Screw
Between 0.968 inches and 1.000 inches fastener length, pan head style, between 0.473 inches and 0.492 inches head diameter, head height: between 0.162 inches and 0.175 inches .
Manufacturer part number 2928366-1 for national stock number 5305002138884.
Datasheet
-
Product description
Externally Relieved Body Screw NSN 5305-00-213-8884.
-
MPN or Model
2928366-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.292 inches and 0.332 inches -
Fastener Length
Between 0.968 inches and 1.000 inches -
Head Style
Pan -
Head Diameter
Between 0.473 inches and 0.492 inches -
Head Height
Between 0.162 inches and 0.175 inches -
First Diameter From Head
Between 0.178 inches and 0.188 inches -
Distance From Largest Bearing Surface Of Head To End Of First Diameter
Between 0.636 inches and 0.708 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.250 inches -
Thready Qty Per Inch (tpi)
28 -
Externally Relieved Body Diameter Quantity
1 -
Material
Steel comp 302 or steel comp 303 -
Material Specification
Qq-s-763 federal specification 1st material response or astm a582 assn standard 2nd material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Mil-f-14072 finish e300 military specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5985-00-072-9611 MPN 2269839Waveguide Assembly
- 5985-00-073-0592 MPN 2271242PC1REVCWaveguide Assembly
- 5935-00-097-1136 MPN 2047301-2Electrical Receptacle Connector
- 5905-00-100-6972 MPN 212695-84Inductive Wire Wound Fixed Resistor
- 5940-00-109-2583 MPN 417362PC2Terminal Board
- 5950-00-109-5627 MPN 2682764Power Transformer
- 5950-00-131-7509 MPN 2469363-10Radio Frequency Coil
- 5930-00-134-9497 MPN 2550955-1Switch Subassembly
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also bolt, externally relieved body and bolt, internal wrenching.
Pricing and Availability
Get a quote for 5305-00-213-8884 externally relieved body screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
2928366-1 | Navair And Navsea Managed |