NSN 5305-00-218-4686
High Torque Screw
Between 0.982 inches and 1.029 inches fastener length, flat countersunk head style, between 0.698 inches and 0.762 inches head diameter, grip diameter: between 0.3733 inches and 0.3742 inches .
Manufacturer part number 106706H6-7 for national stock number 5305002184686.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-218-4686.
-
MPN or Model
106706H6-7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.534 inches and 0.601 inches -
Fastener Length
Between 0.982 inches and 1.029 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.698 inches and 0.762 inches -
Grip Diameter
Between 0.3733 inches and 0.3742 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole -
Internal Drive Style
High-torque -
Thread Diameter
0.375 inches -
Grip Length
Between 0.428 inches and 0.448 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.689 inches first hole and 0.721 inches first hole -
Material
Steel -
Material Specification
Sps-m-107 fscm 56878 mfr ref single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard 1st treatment response or mil-c-8837 type 2 cl 2 military specification 2nd treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-018-2335 MPN 128WM10198-2Wing Fitting
- 1560-00-037-1466 MPN 89P1086-3Aircraft Adapter
- 1560-00-066-2902 MPN 123B10466-6Aircraft Window Panel
- 5935-00-088-1715 MPN GC837E1Electrical Connector Cable Clamp
- 5935-00-110-7528 MPN GC810BT2PElectrical Plug Connector
- 1560-00-135-4962 MPN 128B11843-5Cover Assembly
- 5940-00-143-4794 MPN GT805H10-3ALug Terminal
- 1560-00-148-7271 MPN A51B96109-407Aircraft Tip
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-218-4686 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
106706H6-7 | Sps Technologies, Llc |
HT8171H6-7 | Alcoa Global Fasteners, Inc. |
HT8171-6-7 | Alcoa Global Fasteners, Inc. |
GB510BC6-7 | Northrop Grumman Systems Corporation |
106706H6-7 | Sps Technologies Inc |