NSN 5305-00-223-3967
High Torque Screw
1.531 inches fastener length, flat countersunk head style, 0.502 inches head diameter, grip diameter: between 0.2483 inches and 0.2492 inches .
Manufacturer part number NAS334CF14 for national stock number 5305002233967.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-223-3967.
-
MPN or Model
NAS334CF14
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096630 - Screws NOI Brass/bronze/copper -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.469 inches -
Fastener Length
1.531 inches -
Head Style
Flat countersunk -
Head Diameter
0.502 inches -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Single Shear Strength
4650 pounds per square inch -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.250 inches -
Grip Length
1.062 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
100.0 degrees -
Material
Steel -
Surface Treatment
Cadmium -
Thread Series Designator
Unf -
Specification Data
80205-nas334 professional/industrial association standard
More from these suppliers
- 5940-00-688-6002 MPN NAS707S3Stud Terminal
- 5975-00-821-5461 MPN NAS622CT2Hook
- 5940-01-384-3892 MPN NAS1063A8TB98TTerminal Board Marker Strip
- 5305-00-008-9113 MPN NAS1190E02T4LSocket Head Cap Screw
- 5305-00-054-0019 MPN NAS1352C08H12Socket Head Cap Screw
- 5305-00-061-7961 MPN NAS1503-7Machine Screw
- 5305-00-063-4568 MPN MS24630-48Tapping Screw
- 5305-00-068-5393 MPN MS24667-4Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-223-3967 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS334CF14 | National Aerospace Standards |