NSN 5305-00-225-7116
High Torque Screw
Between 0.448 inches and 0.478 inches fastener length, pan head style, between 0.306 inches and 0.322 inches head diameter, head height: between 0.105 inches and 0.115 inches .
Manufacturer part number NAS1172-2N for national stock number 5305002257116.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-225-7116.
-
MPN or Model
NAS1172-2N
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.313 inches and 0.363 inches -
Fastener Length
Between 0.448 inches and 0.478 inches -
Head Style
Pan -
Head Diameter
Between 0.306 inches and 0.322 inches -
Head Height
Between 0.105 inches and 0.115 inches -
Grip Diameter
Between 0.1625 inches and 0.1635 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.164 inches -
Grip Length
Between 0.115 inches and 0.135 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Surface Finish
32.0 microinches threads -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, ty2, cl2 federal specification single treatment response -
Thread Series Designator
Unjc -
Specification Data
80205-nas1172 professional/industrial association standard
More from these suppliers
- 5935-00-972-8484 MPN NAS715-11BElectrical Receptacle Connector
- 5940-01-615-1073 MPN NAS1063C10-210HTerminal Board Marker Strip
- 5305-00-003-9326 MPN NAS6002U16Machine Screw
- 5305-00-034-1388 MPN NAS1624E6Machine Screw
- 5305-00-058-9365 MPN MS51977-22Setscrew
- 5305-00-059-4538 MPN MS35190-12Machine Screw
- 5305-00-061-5308 MPN AN500AD-6-10Machine Screw
- 5305-00-071-2223 MPN MS35199-62Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-225-7116 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1172-2N | National Aerospace Standards |
NAS1172-2K | National Aerospace Standards |
NAS1172-2N | National Aerospace Standards |
NAS1172-2K | National Aerospace Standards |