NSN 5305-00-231-4539
High Torque Screw
0.907 inches fastener length, flat countersunk head style, 0.502 inches head diameter, grip diameter: between 0.2483 inches and 0.2492 inches .
Manufacturer part number NAS334CF7 for national stock number 5305002314539.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-231-4539.
-
MPN or Model
NAS334CF7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.469 inches -
Fastener Length
0.907 inches -
Head Style
Flat countersunk -
Head Diameter
0.502 inches -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Single Shear Strength
4650 pounds per square inch -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.250 inches -
Grip Length
0.428 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
100.0 degrees -
Material
Steel -
Surface Treatment
Cadmium -
Thread Series Designator
Unf -
Specification Data
80205-nas334 professional/industrial association standard
More from these suppliers
- 5940-01-443-8866 MPN NAS1063Terminal Board Marker Strip
- 5935-00-528-8440 MPN NAS1641R16T24SNElectrical Receptacle Connector
- 5305-00-006-8306 MPN NAS1100C06-4PMachine Screw
- 5305-00-007-1565 MPN NAS1100C06-8PMachine Screw
- 5305-00-059-5432 MPN NASM51958-82Machine Screw
- 5305-00-142-3595 MPN NAS600-26PMachine Screw
- 5305-00-143-2035 MPN NAS1189C04P13Socket Head Cap Screw
- 5305-00-225-8476 MPN MS24693-S144Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-231-4539 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS334CF7 | National Aerospace Standards |