NSN 5305-00-232-0689
High Torque Screw
Between 0.890 inches and 0.937 inches fastener length, flat countersunk head style, between 0.376 inches and 0.381 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number HT4062-3-8 for national stock number 5305002320689.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-232-0689.
-
MPN or Model
HT4062-3-8
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.380 inches and 0.447 inches -
Fastener Length
Between 0.890 inches and 0.937 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.376 inches and 0.381 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 0.490 inches and 0.510 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp 4130 -
Surface Treatment
Primer head -
Surface Treatment Specification
Qq-p-416 type 2 cl 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 1680-01-562-2586 MPN VL12AG5-5Materi Aircraft Pin
- 1680-01-116-4503 MPN 200759Extension Unit Barrel
- 5305-00-247-4010 MPN 3M123-3-6PClose Tolerance Screw
- 5305-00-508-2707 MPN LS15266V3-15Close Tolerance Screw
- 5305-00-922-5713 MPN DMS7500-8A3Special Screw
- 5305-01-020-9533 MPN E125-170Machine Screw
- 5305-01-027-5253 MPN HT4028L5-4Close Tolerance Screw
- 5305-01-069-2728 MPN NAS1101E3-12Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-232-0689 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4062-3-8 | Huck International, Inc. |
HT4062-3-8 | Hi-shear Corporation |
HT4062-3-8 | Sps Technologies, Llc |
HT4062-3-8 | Alcoa Global Fasteners, Inc. |
HT4062-3-8 | Lisi Aerospace Canada Corp |
3MA583-8 | Boeing Company, The |
3MA583-8 | Hi-shear Corporation |
3MA583-8 | Sps Technologies, Llc |
3MA583-8 | Alcoa Global Fasteners, Inc. |
3MA583-8 | Lisi Aerospace Canada Corp |
3MFR583-8 | Boeing Company, The |