NSN 5305-00-232-0691
High Torque Screw
Between 0.890 inches and 0.937 inches fastener length, flat countersunk head style, between 0.628 inches and 0.633 inches head diameter, grip diameter: between 0.3110 inches and 0.3120 inches .
Manufacturer part number 3MA585-6 for national stock number 5305002320691.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-232-0691.
-
MPN or Model
3MA585-6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.505 inches and 0.572 inches -
Fastener Length
Between 0.890 inches and 0.937 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.628 inches and 0.633 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.312 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp 4130 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-114-8828 MPN 53-871060-1Body As Guillotine
- 1560-00-137-5299 MPN 53-65019-5Cable Guard Tube
- 1560-00-138-7871 MPN 32-18504-307Flap Closure
- 1560-00-231-4677 MPN 53-140056-3Mechanism Support Fitting
- 1560-00-232-4253 MPN 32-11586-1Hinge Pin Retainer
- 1560-00-249-0047 MPN 53-73301-7Aircraft Pylon
- 1560-00-272-7736 MPN 68A731036-1005Centerline Pylon Tee
- 1560-00-390-6416 MPN 68A731262-2007Aircraft Bulkhead
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-232-0691 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3MA585-6 | Boeing Company, The |
3MFRA585-6 | Boeing Company, The |
3MA585-6 | Boeing Company, The |
3MFRA585-6 | Boeing Company, The |