NSN 5305-00-232-1035
High Torque Screw
Between 0.816 inches and 0.846 inches fastener length, flat countersunk head style, between 0.497 inches and 0.507 inches head diameter, grip diameter: between 0.2479 inches and 0.2485 inches .
Manufacturer part number 110148-4-6 for national stock number 5305002321035.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-232-1035.
-
MPN or Model
110148-4-6
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.456 inches -
Fastener Length
Between 0.816 inches and 0.846 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.497 inches and 0.507 inches -
Grip Diameter
Between 0.2479 inches and 0.2485 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Titanium alloy -
Material Specification
Nas 621 assn standard single material response -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-159-5550 MPN NAS1101E06-7Machine Screw
- 5305-00-323-2463 MPN 3MA585-19TClose Tolerance Screw
- 5305-00-424-6830 MPN NAS1135V10Close Tolerance Screw
- 5305-00-464-2620 MPN NAS1012-14AHexagon Head Cap Screw
- 5305-00-587-2635 MPN 66904H4-13Shoulder Screw
- 5305-00-680-6395 MPN NAS1203-5Close Tolerance Screw
- 5305-01-021-1015 MPN 12705L-8C-80Shoulder Screw
- 5305-01-028-5695 MPN NAS1123E4HClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-232-1035 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
110148-4-6 | Sps Technologies, Llc |