NSN 5305-00-232-1036
High Torque Screw
Between 0.816 inches and 0.846 inches fastener length, flat countersunk head style, between 0.449 inches and 0.507 inches head diameter, grip diameter: between 0.2479 inches and 0.2485 inches .
Manufacturer part number 110148-4-3 for national stock number 5305002321036.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-232-1036.
-
MPN or Model
110148-4-3
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.431 inches and 0.481 inches -
Fastener Length
Between 0.816 inches and 0.846 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.449 inches and 0.507 inches -
Grip Diameter
Between 0.2479 inches and 0.2485 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Titanium alloy -
Material Specification
Ams4967 assn standard single material response -
Thread Series Designator
Unf
More from these suppliers
- 1560-01-606-1374 MPN CH138-4D-11-6Aircraft Channel
- 5305-00-067-6914 MPN 454208Machine Screw
- 5305-00-257-5584 MPN 106678-9Setscrew
- 5305-01-054-6244 MPN 121754-7-14Close Tolerance Screw
- 5305-01-104-1468 MPN 3M925C3-5DClose Tolerance Screw
- 5305-01-132-1066 MPN 110179-4-16ASClose Tolerance Screw
- 5305-01-141-7918 MPN HT4010-7-17Shoulder Screw
- 5305-01-239-0643 MPN HT4020-4-17AYShoulder Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-232-1036 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
110148-4-3 | Sps Technologies, Llc |