NSN 5305-00-232-4372
High Torque Screw
Tncludes o ring,synthetic rubber per mil-r-6855 grade 60 classes 1,2,3.
Manufacturer part number HT4UA-18 for national stock number 5305002324372.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-232-4372.
-
MPN or Model
HT4UA-18
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.469 inches -
Fastener Length
Between 1.578 inches and 1.625 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.4640 inches and 0.5066 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 1.115 inches and 1.135 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp 4140 or steel comp e4340 or steel comp 8740 or steel comp 8735 or steel comp 4130 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 class 3 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-345-2368 MPN HT4024L4-2Close Tolerance Screw
- 5305-00-486-2596 MPN HR101H10-24Close Tolerance Screw
- 5305-00-754-4239 MPN HT6M32Close Tolerance Screw
- 5305-00-842-7548 MPN HT195-5-38Close Tolerance Screw
- 5305-01-013-9599 MPN HT309-7D25Close Tolerance Screw
- 5305-01-045-9640 MPN HT4009-3-5Shoulder Screw
- 5305-01-059-0192 MPN NAS1190-04P7KMachine Screw
- 5305-01-146-7294 MPN HT4049-5-11Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-232-4372 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4UA-18 | Hi-shear Corporation |
HT4UA-18 | Lisi Aerospace Canada Corp |
HT4UA-18 | Alcoa Fastening Systems |
HT4UA-18 | Satair A/s |