NSN 5305-00-232-8493
High Torque Screw
Between 0.362 inches and 0.409 inches fastener length, flat countersunk head style, between 0.390 inches and 0.395 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number HT4V-1 for national stock number 5305002328493.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-232-8493.
-
MPN or Model
HT4V-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.219 inches and 0.350 inches -
Fastener Length
Between 0.362 inches and 0.409 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.390 inches and 0.395 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 0.059 inches and 0.072 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
100.0 degrees -
Surface Finish
16.0 microinches grip -
Material
Steel comp 431 -
Material Specification
Mil-s-18732 military specification single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-008-5895 MPN NAS1102-06-14BMachine Screw
- 5305-00-508-3008 MPN LS15234C4-6Close Tolerance Screw
- 5305-00-541-9344 MPN HT4025L4D14Close Tolerance Screw
- 5305-00-764-3019 MPN HT4UA4-15Machine Screw
- 5305-01-025-6962 MPN HT4049-4D15Close Tolerance Screw
- 5305-01-044-7265 MPN NB1114-1032-4Close Tolerance Screw
- 5305-01-199-7852 MPN HT4075V5-9-37Close Tolerance Screw
- 5305-01-241-0757 MPN HT4020-6-19AClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-232-8493 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4V-1 | Hi-shear Corporation |