NSN 5305-00-242-4537
Tap Bolt
Between 7.312 inches and 7.688 inches fastener length, hexagon head style, between 0.378 inches and 0.403 inches head height, width between flats: between 0.906 inches and 0.937 inches .
Manufacturer part number MS16208-157 for national stock number 5305002424537.
Datasheet
-
Product description
Hexagon Head Cap Screw NSN 5305-00-242-4537.
-
MPN or Model
MS16208-157
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.8 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
1.750 inches -
Fastener Length
Between 7.312 inches and 7.688 inches -
Head Style
Hexagon -
Head Height
Between 0.378 inches and 0.403 inches -
Width Between Flats
Between 0.906 inches and 0.937 inches -
Thread Diameter
0.625 inches -
Thready Qty Per Inch (tpi)
11 -
Min. Tensile Strength (psi)
75000 pounds per square inch -
Minimum Yield Strength
30000 pounds per square inch -
Material
Steel comp 302 or steel comp 303 or steel comp 304 or steel comp 305 or steel comp 310 or steel comp 316 -
Thread Series Designator
Unc
More from these suppliers
- 1560-00-092-0160 MPN 340-0090503-613Heat System Insulation Assembly
- 5945-00-133-9167 MPN 97-38022-011Electromagnetic Relay
- 5940-00-801-2454 MPN NAS707G2Stud Terminal
- 1560-01-423-0213 MPN NAS6708D38Aircraft Structural Component Support
- 5940-01-625-6054 MPN NAS1063C8-1Terminal Board Marker Strip
- 5305-00-008-2104 MPN NAS1100C02-6PMachine Screw
- 5305-00-051-4497 MPN MS51973-19Setscrew
- 5305-00-114-1905 MPN NAS1352-10LE44PSocket Head Cap Screw
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.
Pricing and Availability
Get a quote for 5305-00-242-4537 hexagon head cap screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS16208-157 | National Aerospace Standards |
MS16208-157 | Military Standards |
76Z0739-25 | Hughes Missile Systems Co |