NSN 5305-00-252-8656
Tap Bolt
Oval point.
Manufacturer part number 11640338 for national stock number 5305002528656.
Datasheet
-
Product description
Hexagon Head Cap Screw NSN 5305-00-252-8656.
-
MPN or Model
11640338
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.500 inches -
Fastener Length
Between 3.220 inches and 3.280 inches -
Head Style
Hexagon -
Head Height
Between 0.263 inches and 0.268 inches -
Width Between Flats
Between 0.922 inches and 0.938 inches -
Shank Unthreaded Hole Diameter
0.110 inches first hole and 0.170 inches first hole -
Thread Diameter
0.625 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
150000 pounds per square inch -
Hardness Rating
32.0 rockwell c and 38.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.810 inches first hole and 2.870 inches first hole -
Material
Steel -
Material Specification
Sae gr 8 assn standard single material response -
Thread Series Designator
Unf
More from these suppliers
- 5935-01-119-0274 MPN 12310023Connector Adapter
- 4820-01-126-7509 MPN 12265717Hydraulic System Bleeder Valve
- 5930-01-239-1707 MPN 12335545-1Pressure Switch
- 5905-01-247-5277 MPN 12296043-1Film Fixed Resistor
- 5935-01-387-0427 MPN 12387121-1Connector Adapter
- 5935-01-460-0989 MPN 12421839Electrical Plug Connector
- 5975-01-469-5558 MPN 12460418Electrical Cable Nipple
- 5975-01-474-0577 MPN 12465781Electronic Equipment Mounting Tray
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.
Pricing and Availability
Get a quote for 5305-00-252-8656 hexagon head cap screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
11640338 | U S Army Tank Automotive Command |