NSN 5305-00-253-2587
High Torque Screw
Between 1.277 inches and 1.324 inches fastener length, flat countersunk head style, between 0.497 inches and 0.507 inches head diameter, grip diameter: between 0.2483 inches and 0.2492 inches .
Manufacturer part number C079-4-16 for national stock number 5305002532587.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-253-2587.
-
MPN or Model
C079-4-16
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.267 inches and 0.334 inches -
Fastener Length
Between 1.277 inches and 1.324 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.497 inches and 0.507 inches -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.990 inches and 1.010 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
300000 pounds per square inch -
Hardness Rating
55.0 rockwell c and 58.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel -
Surface Treatment
Nickel and cadmium -
Surface Treatment Specification
Ams 2416 assn standard all treatment responses -
Thread Series Designator
Unj
More from these suppliers
- 5305-00-079-1751 MPN NAS1101C3-26Machine Screw
- 5305-00-167-6701 MPN 130035511Special Screw
- 5305-00-186-9221 MPN SFT22-4A30Close Tolerance Screw
- 5305-00-240-6605 MPN NAS1189-08P4LSocket Head Cap Screw
- 5305-00-336-3003 MPN SD30074899-1Socket Head Cap Screw
- 5305-00-574-0224 MPN 76122-3-3Machine Screw
- 5305-00-925-0478 MPN 54266-6-19Machine Screw
- 5305-01-018-8926 MPN HT4036-4D14Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-253-2587 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
C079-4-16 | Lockheed Martin Corporation |
SFT930-4-16 | Sps Technologies, Llc |
VS2787T4C16 | Alcoa Global Fasteners, Inc. |