NSN 5305-00-253-5230
High Torque Screw
Plunger operated,two spring loaded retaining balls.
Manufacturer part number NASM21125 for national stock number 5305002535230.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-253-5230.
-
MPN or Model
NASM21125
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.278 inches and 0.329 inches -
Fastener Length
Between 2.356 inches and 2.376 inches -
Head Style
Flat chamfer -
Head Diameter
Between 0.477 inches and 0.492 inches -
Head Height
Between 0.126 inches and 0.141 inches -
Grip Diameter
Between 0.2487 inches and 0.2492 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 1.937 inches and 1.953 inches -
Thready Qty Per Inch (tpi)
28 -
Surface Finish
32.0 microinches grip -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp 631 or steel comp 302 or steel comp 440c -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1680-01-535-6804 MPN CA17248-6-8-2Turnlock Receptacle
- 5305-00-151-7983 MPN CA2630-0546Close Tolerance Screw
- 5305-00-193-6662 MPN 694D3-59-60Panel Fastener Screw
- 5305-00-840-5962 MPN 965336-1Externally Relieved Body Screw
- 5305-01-037-2287 MPN CA2658-5-11Close Tolerance Screw
- 5305-01-090-6338 MPN CA28102-06-8PPanel Screw Assembly
- 5305-01-180-6613 MPN 21T03-3-09-1AAPanel Screw Assembly
- 5305-01-219-8421 MPN CA4341Panel Screw Assembly
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-253-5230 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NASM21125 | National Aerospace Standards |
NASM23964 | National Aerospace Standards |
AS116-04-31 | Avibank Mfg., Inc. |
MS21125-0431 | National Aerospace Standards |
MS21125-0431 | Military Standards |
MIL-B-23964 | Military Specifications |
CA2652-04-31 | Arconic Global Fasteners & Rings, |
AS116-04-31 | Avibank Mfg., Inc. |
CA2652-04-31 | Arconic Global Fasteners & Rings, |