NSN 5305-00-261-1974
Tap Bolt
4.000 inches fastener length, hexagon head style, between 0.455 inches and 0.483 inches head height, width between flats: between 1.100 inches and 1.125 inches .
Manufacturer part number MS35289-195 for national stock number 5305002611974.
Datasheet
-
Product description
Hexagon Head Cap Screw NSN 5305-00-261-1974.
-
MPN or Model
MS35289-195
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 1.750 inches and 2.000 inches -
Fastener Length
4.000 inches -
Head Style
Hexagon -
Head Height
Between 0.455 inches and 0.483 inches -
Width Between Flats
Between 1.100 inches and 1.125 inches -
Thread Diameter
0.750 inches -
Thready Qty Per Inch (tpi)
10 -
Min. Tensile Strength (psi)
64000 pounds per square inch -
Hardness Rating
100.0 rockwell b -
Minimum Yield Strength
52000 pounds per square inch -
Material
Steel -
Material Specification
Sae gr 2 assn standard single material response -
Thread Series Designator
Unc
More from these suppliers
- 5935-00-020-7895 MPN WC596C21Electrical Plug Connector
- 4820-00-203-3656 MPN WWV51Angle Valve
- 4820-00-282-7089 MPN WWV54Gate Valve
- 5975-00-503-0786 MPN WJ800Junction Box
- 5935-00-644-7041 MPN WC00596P41Electrical Plug Connector
- 5930-00-727-4392 MPN 1-5ACL3DNAToggle Switch
- 5975-00-752-2937 MPN WWC540Rigid Metal Conduit
- 5975-00-839-7290 MPN WC586AConduit Outlet
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.
Pricing and Availability
Get a quote for 5305-00-261-1974 hexagon head cap screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS35289-195 | Military Standards |
FFS85TYPE2STYLE10PGRADE2 | Federal Specifications |