NSN 5305-00-267-8954
Tap Bolt
1.250 inches fastener length, hexagon head style, between 0.150 inches and 0.163 inches head height, width between flats: between 0.428 inches and 0.438 inches .
Manufacturer part number FF-S-85 for national stock number 5305002678954.
Datasheet
-
Product description
Hexagon Head Cap Screw NSN 5305-00-267-8954.
-
MPN or Model
FF-S-85
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.750 inches and 0.938 inches -
Fastener Length
1.250 inches -
Head Style
Hexagon -
Head Height
Between 0.150 inches and 0.163 inches -
Width Between Flats
Between 0.428 inches and 0.438 inches -
Thread Diameter
0.250 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
150000 pounds per square inch -
Hardness Rating
32.0 rockwell c and 38.0 rockwell c -
Material
Steel -
Material Specification
Sae j429 gr 8 assn standard single material response -
Surface Treatment
Zinc and chromate -
Surface Treatment Specification
Astm b633 type 2 sc 3 assn standard single treatment response -
Thread Series Designator
Unf -
Nondefinitive Specification/std Data
2 type and 10 style and 8 grade
More from these suppliers
- 5985-00-095-6545 MPN 174AS104-2Radio Frequency Transmission Line Switch
- 5935-00-233-4460 MPN 247ASC0396-003Electrical Receptacle Connector
- 1680-00-517-0164 MPN 62A130H1-3Shoulder Aircraft Safety Harness
- 4920-00-890-7960 MPN 67A27F12Test Set Control
- 5950-01-032-7895 MPN 247ASC2583-011Radio Frequency Coil
- 5935-01-034-3472 MPN 604AS480-8Electrical Plug Connector
- 5935-01-035-5135 MPN 604AS481-8Electrical Plug Connector
- 5940-01-069-2041 MPN 2597095Stud Terminal
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.
Pricing and Availability
Get a quote for 5305-00-267-8954 hexagon head cap screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
FF-S-85 | Federal Specifications |
67A219J2PC152 | Naval Air Systems Command |
B1821BH025F125N | American National Standards |
MS90726-10 | Military Standards |
MS90727-10 | Military Standards |
5305PL0795126 | Inspektorat Wsparcia Sil Zbrojnych |
5305002678954 | E.c.a Etablissement |
5305002678977 | E.c.a Etablissement |
10396753 | Nimikkeistokeskus Ncb Finland |
5305002678954 | E.c.a Etablissement Central |
5305002678977 | E.c.a Etablissement Central |