NSN 5305-00-269-2796
Tap Bolt
0.375 inches fastener length, between 0.226 inches and 0.243 inches head height, between 0.551 inches and 0.562 inches width between flats, thread diameter: 0.375 inches.
Manufacturer part number 251570 for national stock number 5305002692796.
Datasheet
-
Product description
Hexagon Head Cap Screw NSN 5305-00-269-2796.
-
MPN or Model
251570
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.375 inches -
Fastener Length
0.375 inches -
Head Height
Between 0.226 inches and 0.243 inches -
Width Between Flats
Between 0.551 inches and 0.562 inches -
Thread Diameter
0.375 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
120000 pounds per square inch -
Hardness Rating
23.0 rockwell c and 32.0 rockwell c -
Minimum Yield Strength
85000 pounds per square inch -
Material
Steel -
Material Specification
Sae gr 5 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, cl 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5940-01-451-4311 MPN NAS1744-1Conductor Splice
- 5940-01-451-4409 MPN NAS1063A2-107AKTerminal Board Marker Strip
- 5940-01-386-4758 MPN NAS1063B105-120Terminal Board Marker Strip
- 5935-00-111-1892 MPN NAS1665-16Electrical Connector Backshell
- 5305-00-057-0528 MPN NASM51958Machine Screw
- 5305-00-071-2231 MPN MS90725-20Hexagon Head Cap Screw
- 5305-00-078-9643 MPN MS27039-1-34Machine Screw
- 5305-00-088-9520 MPN MS51029-49Setscrew
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.
Pricing and Availability
Get a quote for 5305-00-269-2796 hexagon head cap screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
251570 | Daf Trucks N.v. |
MS90726-53 | National Aerospace Standards |
MS90726-53 | Military Standards |
251570 | Daf Trucks N.v. |
MS90726-53 | National Aerospace Standards |
MS90726-53 | Military Standards |
251570 | Daf Trucks N.v. |
MS90726-53 | National Aerospace Standards |
MS90726-53 | Military Standards |