NSN 5305-00-270-7507
Tap Bolt
2.500 inches fastener length, hexagon head style, between 0.531 inches and 0.563 inches head height, width between flats: between 1.285 inches and 1.312 inches .
Manufacturer part number MS35290-211 for national stock number 5305002707507.
Datasheet
-
Product description
Hexagon Head Cap Screw NSN 5305-00-270-7507.
-
MPN or Model
MS35290-211
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 2.000 inches and 2.188 inches -
Fastener Length
2.500 inches -
Head Style
Hexagon -
Head Height
Between 0.531 inches and 0.563 inches -
Width Between Flats
Between 1.285 inches and 1.312 inches -
Thread Diameter
0.875 inches -
Thready Qty Per Inch (tpi)
14 -
Min. Tensile Strength (psi)
55000 pounds per square inch -
Hardness Rating
207.0 brinell standard -
Minimum Yield Strength
28000 pounds per square inch -
Material
Steel -
Material Specification
Sae gr 2 assn standard single material response -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-003-2550 MPN MS3470L12-10PElectrical Receptacle Connector
- 5940-00-082-4664 MPN MS27249-4Terminal Board
- 5935-00-090-7062 MPN MS3152R16Electrical Connector Cable Clamp
- 5935-00-103-7482 MPN MS27497E24A61SAElectrical Receptacle Connector
- 5935-00-147-9568 MPN MS27508E18A32SElectrical Receptacle Connector
- 5940-00-156-7345 MPN MS77067-2Lug Terminal
- 5905-00-195-6741 MPN MS35043-206Composition Fixed Resistor
- 5935-00-201-8369 MPN MS3106A20-14SElectrical Plug Connector
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.
Pricing and Availability
Get a quote for 5305-00-270-7507 hexagon head cap screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS35290-211 | Military Standards |