NSN 5305-00-271-8351
Bolt Stove
0.500 inches fastener length, fillister head style, between 0.124 inches and 0.140 inches head diameter, head height: between 0.055 inches and 0.062 inches .
Manufacturer part number 213800S2-8 for national stock number 5305002718351.
Datasheet
-
Product description
Machine Screw NSN 5305-00-271-8351.
-
MPN or Model
213800S2-8
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.464 inches and 0.500 inches -
Fastener Length
0.500 inches -
Head Style
Fillister -
Head Diameter
Between 0.124 inches and 0.140 inches -
Head Height
Between 0.055 inches and 0.062 inches -
Hole Diameter
0.031 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.086 inches -
Hole Quantity
1 -
Thready Qty Per Inch (tpi)
56 -
Screw Material
Steel comp 303 or steel comp 303se or steel comp 430 or steel comp 302 -
Screw Material Specification
Mil-s-7720 military specification 1st material response or mil-s-18732 military specification 2nd material response or mil-s-7720 military specification 3rd material response or qq-s-763 federal specification 4th material response -
Screw Surface Treatment
Passivate -
Head Hole Configuration Style
Round -
Thread Series Designator
Unc
More from these suppliers
- 1560-00-606-7955 MPN 57J9231Aircraft Fuel Tank
- 5925-00-500-7026 MPN 43A8304-6Circuit Breaker
- 5306-00-151-3193 MPN 85H37Close Tolerance Bolt
- 5935-00-259-0025 MPN AN3106A22-24PElectrical Plug Connector
- 5305-00-067-7782 MPN AN500D6-12Machine Screw
- 5305-00-081-4295 MPN AN565DC1032H16Setscrew
- 5305-00-147-3224 MPN AN530C4R8Tapping Screw
- 5305-00-150-9163 MPN AN501-8-16Machine Screw
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-00-271-8351 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
213800S2-8 | Kearfott Corporation |
AC500AC2-8 | Department Of The Air Force |
AN500AC2-8 | Aeronautical Standards Group |