NSN 5305-00-274-7711
Panel Screw
Between 0.359 inches and 0.391 inches fastener length, flat chamfer head style, between 0.198 inches and 0.208 inches head diameter, head height: between 0.077 inches and 0.083 inches .
Manufacturer part number 546-0999-002 for national stock number 5305002747711.
Datasheet
-
Product description
Externally Relieved Body Screw NSN 5305-00-274-7711.
-
MPN or Model
546-0999-002
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.162 inches and 0.214 inches -
Fastener Length
Between 0.359 inches and 0.391 inches -
Head Style
Flat chamfer -
Head Diameter
Between 0.198 inches and 0.208 inches -
Head Height
Between 0.077 inches and 0.083 inches -
First Diameter From Head
Between 0.078 inches and 0.082 inches -
Distance From Largest Bearing Surface Of Head To End Of First Diameter
Between 0.177 inches and 0.197 inches -
Internal Drive Style
Slot -
Thread Diameter
0.112 inches -
Thready Qty Per Inch (tpi)
40 -
Externally Relieved Body Diameter Quantity
1 -
Material
Steel comp 303 -
Material Specification
Astm a582 assn standard single material response -
Thread Series Designator
Unc
More from these suppliers
- 5935-00-007-0753 MPN 372-2621-018Electrical Receptacle Connector Body
- 5950-00-060-9557 MPN 278-0534-000Radio Frequency Coil
- 5950-00-066-9319 MPN 678-0065-000Reactor
- 5905-00-112-6911 MPN 705-3604-070Film Fixed Resistor
- 5935-00-131-9680 MPN 360-0159-000Tip Jack
- 5905-00-192-4490 MPN 745-1288-000Composition Fixed Resistor
- 5950-00-236-4949 MPN 672-0395-010Power Transformer
- 5935-00-236-7887 MPN 775-4359-001Plug-in Electronic Components Socket Retainer
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also bolt, externally relieved body and bolt, internal wrenching.
![Mechanic Bill explains Panel Screw](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5305-00-274-7711 externally relieved body screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
546-0999-002 | Rockwell Collins, Inc. |
Stock Check
![](/public/images/partscage_shelf3.png)