NSN 5305-00-275-3601
High Torque Screw
Between 1.069 inches and 1.116 inches fastener length, fillister countersunk head style, between 0.390 inches and 0.395 inches head diameter, head height: 0.015 inches .
Manufacturer part number ST3M455-4-11-1 for national stock number 5305002753601.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-275-3601.
-
MPN or Model
ST3M455-4-11-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.371 inches and 0.438 inches -
Fastener Length
Between 1.069 inches and 1.116 inches -
Head Style
Fillister countersunk -
Head Diameter
Between 0.390 inches and 0.395 inches -
Head Height
0.015 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 0.678 inches and 0.698 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Stainless steel -
Material Specification
23-112, fscm 76301 mfr ref single material response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-01-456-2778 MPN HS5678C3212Index Pin
- 5305-01-030-2653 MPN 11873-3-6-5Close Tolerance Screw
- 5305-01-417-2495 MPN 3M1170D4-20Close Tolerance Screw
- 5305-01-462-2863 MPN 11825V5-8AClose Tolerance Screw
- 5305-01-513-8799 MPN 11827C5-14AClose Tolerance Screw
- 5306-01-237-2790 MPN 11829-10-77EShear Bolt
- 5320-00-288-3320 MPN TLD100-5-6EPin-rivet
- 5320-00-913-7371 MPN TLH100-3-8Pin-rivet
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-275-3601 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
ST3M455-4-11-1 | Boeing Company, The |
HT4016-4-11 | Hi-shear Corporation |
HT4016-4-11 | Lisi Aerospace Canada Corp |
11907-4-11-1 | Reid Products Inc. |