NSN 5305-00-279-9073
High Torque Screw
Between 1.265 inches and 1.312 inches fastener length, flat countersunk head style, between 0.629 inches and 0.634 inches head diameter, grip diameter: between 0.3112 inches and 0.3120 inches .
Manufacturer part number HT5A12 for national stock number 5305002799073.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-279-9073.
-
MPN or Model
HT5A12
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.505 inches and 0.572 inches -
Fastener Length
Between 1.265 inches and 1.312 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.629 inches and 0.634 inches -
Grip Diameter
Between 0.3112 inches and 0.3120 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.312 inches -
Grip Length
Between 0.740 inches and 0.760 inches -
Thready Qty Per Inch (tpi)
24 -
Countersink Angle
100.0 degrees -
Material
Steel comp 431 -
Material Specification
Mil-s-18732 military specification single material response -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-008-7871 MPN NAS1191E04P3LSocket Head Cap Screw
- 5305-00-144-0508 MPN NAS1121-6HClose Tolerance Screw
- 5305-00-205-3674 MPN NAS1189E06P4LSocket Head Cap Screw
- 5305-00-316-7377 MPN ST3M454-4L4Close Tolerance Screw
- 5305-00-390-0685 MPN HT260LB3-15Close Tolerance Screw
- 5305-00-427-6738 MPN NAS1189-04P10Socket Head Cap Screw
- 5305-00-527-4419 MPN HT4M-14Close Tolerance Screw
- 5305-00-680-5412 MPN NAS1204-48Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-279-9073 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT5A12 | Lisi Aerospace Canada Corp |
HT5A12 | Hi-shear Corporation |
HT5A12 | Alcoa Fastening Systems |
HT5E12 | Hi-shear Corporation |